Attempting to tighten or fix a torsion spring on your own frequently results in serious or even fatal injury. If your torsion spring needs tightening or replacing, we highly recommend calling a professional service – the tension stored in the springs holds a lot of energy, and is a tricky fix even for experienced DIY-ers. If you were at home when a torsion spring snapped, you may have heard a loud explosion-like noise from your garage. Look to see if there are any gaps between the coils – if so, the torsion spring is likely the culprit. If you hear your garage door trying to open but it doesn’t, or if you have a garage door not opening completely, a quick visual inspection can show you whether the torsion springs are damaged or broken. It’s the tension stored in those springs that actually gets your heavy garage door to move up and down. The torsion springs are a pair of tightly wound coils usually located right above your garage door.

You might say that your garage door opener is the brains of the operation, and that the torsion springs do most of the heavy lifting. The good news is, turning off the release is as easy as turning it on – simply pull the cord again, hit your garage door remote, and your garage door should pop right back on track. Pulling that cord disengages the garage door from the motor, so your garage door would essentially be manually-operated while the release is on. (We know it’s relatively easy to reach because safety codes state that it shouldn’t be higher than 6 feet above the ground.) Usually located towards the front of your garage, the manual release is that brightly-colored cord hanging down within easy reach. If you click your remote and hear the garage door opener’s motor running but the door won’t open, the first thing you should do is check to see that the manual release isn’t engaged. Read on to learn how to troubleshoot a garage door that’s not opening properly. To make things a little easier, we list the possible fixes from least to most difficult, so you don’t go through any unnecessary trouble. After all, your garage door basically has one job – to open and close (okay, that’s two jobs if you want to split hairs).īut don’t worry, we’ll walk you through all the necessary steps and show you how to fix a garage door that just doesn’t want to open. It can be pretty frustrating if your garage door won’t open and you’re trying to get your car in off the street, or out onto the open road.

Genie intellicode keypad wont open door